Quick and Easy Steps for Pouring Concrete into a Candle Holder Mold

Quick and Easy Steps for Pouring Concrete into a Candle Holder Mold

Are you looking to create your own unique candle holders using concrete? In this article, we will provide you with quick and easy steps on how to pour concrete into a candle holder mold. Whether you’re a beginner or an experienced DIY enthusiast, this guide will help you achieve professional-looking results in no time. Follow along as we walk you through the process step by step.

Preparation Steps

Gather Materials and Tools

Before starting the process of pouring concrete into a candle holder mold, make sure you have all the necessary materials and tools on hand. You will need:

  • Concrete mix
  • Candle holder mold
  • Water
  • Mixing container
  • Mixing tool (such as a trowel or stick)
  • Release agent (such as cooking spray or silicone spray)
  • Gloves
  • Safety goggles

Prepare the Work Area

It is important to set up your work area properly before pouring the concrete. Here are some steps to follow:

  1. Choose a well-ventilated area to work in, as the concrete mix can produce dust and fumes.
  2. Lay down a protective covering (such as a tarp or old sheet) to catch any spills or drips.
  3. Make sure your work surface is level and stable to prevent any accidents.
  4. Have a water source nearby in case you need to clean up any spills quickly.

By following these preparation steps, you can ensure a smooth and successful process of pouring concrete into a candle holder mold.

Mixing the Concrete

Measure the Concrete Mix

Before starting the mixing process, it is important to measure the correct amount of concrete mix for your candle holder mold. Follow the instructions on the packaging to ensure you have the right ratio of mix to water.

Add Water and Mix Thoroughly

Once you have measured out the concrete mix, it’s time to add water and mix thoroughly. Start by slowly adding water to the mix and stirring it consistently. Make sure to mix until all the dry mix is fully incorporated and the consistency is smooth and free of any clumps. This will ensure that your candle holder mold is filled evenly and sets properly.

Pouring the Concrete

Fill the Candle Holder Mold

To start pouring concrete into a candle holder mold, first, mix the concrete according to the instructions on the packaging. Make sure the consistency is smooth and free of lumps.

Next, carefully pour the concrete mixture into the candle holder mold, making sure to fill it up to the top. You can use a small spoon or spatula to help guide the concrete into all the nooks and crannies of the mold.

Tap and Level the Mold

After filling the mold with concrete, gently tap the sides of the mold to help release any air bubbles trapped inside. This will ensure a smoother finish on your concrete candle holder.

Once the air bubbles have been released, use a leveler to make sure the concrete is evenly spread and level inside the mold. This will help prevent any uneven surfaces or cracks from forming as the concrete sets.

By following these quick and easy steps, you can pour concrete into a candle holder mold with ease and create a beautifully crafted piece for your home decor.

Curing and Finishing

After pouring the concrete into the candle holder mold, it is important to properly cure and finish the piece to ensure a durable and polished final product.

Cover and Let Cure

Once the concrete has been poured into the mold, cover it with a plastic sheet or tarp to protect it from dust and debris. Allow the concrete to cure and set for at least 24 hours, or as recommended by the concrete product instructions. This curing process is crucial for the concrete to reach its maximum strength and durability.

Remove the Concrete Candle Holder

After the concrete has fully cured, carefully remove the candle holder from the mold. Gently tap the sides of the mold to loosen the concrete, then carefully flip it over and gently remove the mold. Be sure to handle the concrete piece with care to avoid any damage.

Once the concrete candle holder has been removed from the mold, you can further finish and customize it as desired. Sand down any rough edges or imperfections, and seal the concrete with a concrete sealer to protect it from moisture and stains. Finally, place a candle in the holder and enjoy your beautifully crafted concrete candle holder.


In conclusion, pouring concrete into a candle holder mold is a simple and rewarding DIY project that can add a unique touch to your home decor. By following the quick and easy steps outlined in this article, you can create a beautiful and functional piece that will impress your guests and add a personal touch to any room. So gather your materials, get creative, and enjoy the process of making your own concrete candle holders. Happy crafting!